ground- water, geo- statistics, environmental- engineering, earth- science

Own Your Writing

without comments

I just posted on about “Own Your Writing!”.

In this post, I

  • discuss how important it is to own what you write, even if it comes at a cost: Knowing technology and money. Also, it seems like publishing has become more complicated than it needs to be on open solutions.
  • play with the new JSON-feed format (in python)
  • Written by Claus

    June 21st, 2017 at 9:48 am

    Posted in


    without comments

    In my work about spatial dependence, I do see that in different ranges of quantiles, the type of dependence can differ. More generally, this means that thresholds are an important characteristic of environmental systems.

    This is why I think this video that I noticed on is so inspiring: sometimes something small leads to a big change — a “threshold” is “jumped over”:

    Written by Claus

    June 7th, 2017 at 3:37 pm

    Posted in

    Years of Blogging

    without comments

    • Manton Reece celebrated 15 years of blogging in March. It turns out that does not date that far back, but almost 11 years of blogging is not nothing either. The details are actually blurry in my mind. Definitely Dayf had started the “boardinger” at some time around 2003, we had used that for a while, and I guess I moved to WordPress in 2006
    • In fact, the WordPress installation at sysprovide has been running and has been upgraded constantly ever since – until last Thursday, when the first outage occurred (at least to my knowledge)
    • If there is one thing certain, it’s that things do change. As does the blogging frequency. I guess there are certain cycles
    • Recently, I started to take as my professional site more seriously, and setup a static page generator (Pelican) that supports Jupyter notebooks. While that is pretty exciting, I do not want to neglect planet water! This is the first post that I am writing and posting with Ulysses and not with my traditional TextMate / MarsEdit combination

    Yay to Independent Blogging!

    I will use the occasion of looking back, following Gabe Weatherhead’s spirit, to give a shout out to independent blogging.

    The following three blogs are in my queue since the beginning of time, none of which are particularly related to water:

    I also admit that I follow a few that are on Gabe’s list, and Gabs himself:

    Written by Claus

    April 9th, 2017 at 8:46 pm

    Posted in

    Update on “Learning and Playing” Update on “Learning and Playing”

    without comments

    Over a year ago I wrote a post on “Learning and Playing“. In the meantime, three important things happened, that lead me to update the original post:

    • yesterday, Apple announced the release of “Swift Playgrounds
      • this is the review of Rene Ritchie at iMore. He says: “It’s one of the finest things Apple has ever done, and it’s going to change the way coding is done for the next generation.”
    • Lorena A. Barba published a blog post on “Computational Thinking
    • “s/buy/make/” published a wonderful empirical statistical analysis that demonstrates how the complexity of legos is increasing

    An old note for my original post included this note:

    From a big picture view, it seems to me that it is more easy now than it was at the time Mindstorm was published to access computer programming. In contrast to this development (now there are more high level programming languages, now there are more simple plotting APIs) most of the (young) people today regard “the computer” more of a consuming and communication device than an invention and try things out device. More and more people use computers, but at least relatively less people use it for creation – and I think creation involves some way of programming.

    I expect that Swift Playgrounds, once it’s released, will offer the best platform since the original Logo, to learn and play. This is the announcement that made me the most happy among all recent Apple announcements. Lorena A. Barba reframed my “learn and play” phrase into “the essence is what we can do while interacting with computers, as extensions of our mind, to create and discover“. I expect Swift Playgrounds to be a wonderful tool for just that.

    Swift playground
    Screenshot of the Swift Playground Demo site.

    Let’s end with some good news: Lego is holding still onto its original values:

    So what happened with Legos? They made a lot more of them. In doing so, they made a lot of new, specialized bricks, but they made even more general purpose bricks. This trend is easily obscured by the opposite trend in the number of brick types, but from a ‘creative play’ standpoint the bricks you actually end up with are more important than the bricks you could have ended up with.

    And: “yeah… you can do this! Ba… Ba.. Baaa…!” (watch until the end!)

    Written by Claus

    June 14th, 2016 at 11:49 am

    Posted in

    automation: getting papers into papersapp from OmniFocus tasks

    without comments

    I am using OmniFocus to organize my life and in an attempt to get a few things done. My academic live also involves staying on top of publications. I rely on papers as my reference manager. In the last little while, I used OmniFocus to keep track of the papers that I found and that I wanted to get and / or read. This has been a quite reliable workflow, but involved quite some manual clicking.

    OF papers

    This post describes how I improved it with a little applescript to go more directly from OmniFocus to papers:

    • whenever I see a paper that interests me, I capture it into OmniFocus;
      • the title of the task is the title of the paper or whatever else helps me to identify the paper;
      • the note contains the URL to the pdf of the paper, and nothing else;
      • the task gets assigned one particular project, whose sole purpose is to collect papers I want to get / download;
      • the capturing works mostly via Omni’s “clipotron“, the share sheet extension in iOS, or from within Reeder;
    • regularly, I check that project (on its review date) and get the papers. Until very recently, this involved a few steps for each paper: open the note in OF, click on the link, the relevant page would open in Safari, and I would klick on the bookmark tool that I had setup such that this webpage would open in papers. I replaced this with a very simple applescript (see code listing below)
      • make sure that I am connected to the University’s network to ensure that most papers are accessible;
      • select the perspective that focusses on the project that contains the papers I want to get;
      • select the papers that I want to get, hit a keyboard shortcut associated to the applescript in Keyboard Maestro;
      • tada! papers opens the links, tries to retrieve the pdf (which works in most of the cases) and the bibliographic information. All is left for me is to add some meta-data and read;

    Below you can find a listing of the applescript code. It is fairly simple and contains only a few lines. I can see a few areas where it could be expanded (parse URL from note if it contains more stuff than just the URL; what if pdf and / or bibliographic information can not be retrieved by papers). But for most of my use cases it works remarkably well. Hence, I would well agree to John D. Cook’s line of thought that yes, it’s a bit about time being saved, and it’s also about not being derailed. It’s also about accuracy (as followed up by Dr. Drang), and about knowledge transfer and improved processes, as Mike Croucher points out.

    Here’s the code snippet:

    tell application "OmniFocus"
        -- Target the content of the front window
        tell content of front window

        -- get selected entries
        set theTasks to value of every selected tree
        -- loop over each selected task
        repeat with aTask in theTasks
            tell aTask
                -- extract the task name and the note
                -- note contains URL
                set theTaskName to name
                set theNote to note
                display dialog theNote
                -- open in papers; it automatically retrieves the pdf and 
                ---    the bibliographic information (mostly)
                tell application "Papers"
                    open location theNote
                end tell
            end tell
        end repeat
    end tell

    end tell

    Relevant links regarding applescript with the two main software packages used:

    Written by Claus

    December 30th, 2015 at 10:39 am

    Posted in

    Mindstorms: Playing and Learning from Mistakes

    without comments

    Seymour Papert lays down the foundations of his philosophy about programming and about learning in his book Mindstorms: Children, Computers, and Powerful Ideas was heavily involved with the creation of the programming language “Logo” (downloadable here). The main use of this programming language is education in general and learning to program as a side effect. It seems like no coincidence that the name of “Lego Mindstorms” is related to Papert’s book’s title, given that the ancestor of the Lego kit was programmed in Logo.

    “Logo” in Python

    There is a python module called “turtle” in python, that mimics the capabilities of Logo. This is what I used to create the figure below. There are many more examples online, f.ex. here. The point of turtle and Logo is to provide an interface that is easy to grasp, but that allows to build stepwise more and more complex things. I’ve seen an implementation of Tetris using turtle.

    “Das Haus vom Nikolaus ” drawn with turtle in python.

    Learning and Playing

    One of the first points of Papert is that the modern car was not created based on an analysis of the bad things of horse-powered coaches. Rather it happened because some people played around, “experimented” is probably a nicer word. Directly related to playing is the fact that you make mistakes. Which according to him is nothing bad as long as the mistakes are recognized and fixed. Unfortunately, some people are afraid of making mistakes. Papert calls this “Mathophobie”.

    In that sense, Papert argues that it is a good thing if a (young) learner is following epistemology, following two approaches

    1. take “the novel”, the things to be learned, and provide a context with something already known
    2. take “the novel”, embrace it and adopt it, and make based on it something new.

    The computer, and the turtle, or any programming language offer a valuable tool for playing, because it is very easy to fix mistakes! Hence, computers and programming can take away the fear of making mistakes! This sounds like such an awesome thing, but then, debugging can be quite painful! 😉

    Mistakes in Hydro-Geo-Logy

    Unfortunately, I am aware of only a very limited number of reported failures in hydro-geo-logy. “The Court of Miracles of Hydrology: can failure stories contribute to hydrological science? is one example. They build on Popper instead of Papert, but go along a similar vein. And in that issue of the journal there is a list of papers that deal with hydro-geo-logical mistakes. One example are models that are “right for the wrong reasons”.


    Keeping all this in mind will hopefully make me a better teacher in the coming term, but also hopefully keeps me constantly reminded to try out things, if nowhere else than in the code editors! When using Computers, I look a lot at data, process data, and analyze the results. Sometimes, it is quite astounding, it almost seems magic to me, that this entire process works. Inevitably, errors occur, and they need to be found and fixed.

    Written by Claus

    September 24th, 2015 at 9:51 am

    Posted in

    Presenting at Heterogeneity Conference in Valencia (MADE site)

    without comments

    I will be presenting at the AGU Chapman Conference “The MADE Challenge for Groundwater Transport in Highly Heterogeneous Aquifers: Insights from 30 Years of Modeling and Characterization at the Field Scale and Promising Future Directions” website.

    Details my talk at the Chapman Conference
    date Monday, October 5, 2015
    time 04:00 PM – 07:00 PM
    location Blue Auditorium at the Research Park, located on the campus of the Universitat Politècnica de València
    title of talk “Modelling Non-Linear Spatial Dependence with Applications to MADE Hydraulic Conductivity Data”
    authors Claus Haslauer, Geoff Bohling

    The MADE site is one of three sites world wide, where very detailed measurements of aquifer properties and solute transport movement within these aquifers were taken. The other two sites are in Borden, Canada and Cape Cod, Massachusetts. The detail of monitoring was very fine for hydrogeologic applications, e.g. via test well installations used to sample aqueous geochemical parameters, that some people argue that those wells influence the properties of the aquifer (see Figure below).

    MADESite1995 blog
    The MADE site in 1995; Image by Geoff Bohling

    A review of the first 25 years at the MADE site is given by

    C. Zheng, M. Bianchi, and S. M. Gorelick, “Lessons Learned From 25 Years of Research at the MADE Site.,” Ground Water, vol. 49, no. 5, pp. 649–662, Sep. 2011. URL

    Written by Claus

    September 9th, 2015 at 10:17 am

    Posted in

    10 Minutes of Yoga (or Programming) Per Day

    without comments

    I knew it through experience. I knew it from Malcolm Gladwell’s 10,000 hour rule, stating that you need about that number of hours of practice to excel in anything. It is tough. I feel like I had a lot of those hours spent in front of the piano, and I feel like i am not much further then when I started.

    In my daily work, I do a lot of programming. By now, I would say I feel mostly comfortable in python. But, I am no computer scientist, and not a developer of a programming language. I once had a roommate who wrote an operating system for a term project. So at least I feel like I can gauge the work involved. What I try to get to is this this recent tweet from one of the key ipython developers. How awesome is this?

    One year of constant commits to github
    One year of constant commits to GitHub by minrk.

    Also interesting is that not everything is dark green. It can not be. 10 minutes of Yoga per day are better than 30 minutes once per week!


    So my goal is to program from now on at least 30 minutes per working day.

    I played around with various tools to help me keep track of things. I feel like I can’t commit to one repository I have some stuff on repos that I host myself on a server, some on github, some on bitbucket. “I done this” looked very promising, but then my notes sit somewhere and can’t easily access or process them. I settled for now on a simple list in OmniOutliner, which exports to OPML, and which syncs between my smartphone and my computer. I will keep you posted on how I progress!

    update 2015-Sep-08:

    Michael Tsai just posted on a similar issue

    Written by Claus

    August 21st, 2015 at 3:31 pm

    Posted in

    Automatically Prepare Email (Mail, OS X): Sender, Recipient, GPG Encryption Checked

    without comments

    Sometimes, I enjoy doing something that does not belong to my core area of expertise, at first glance. Still it is fun to figure out how something works 😉

    Here is the “problem” I decided to address: – frequently, I send emails to “recipient_x_”. – The content of these messages should be encoded via pgp. I use gpg tools, which I like because their seamless integration into apple mail. Depsite this seamlessness, I have to click on a button to tell mail to encrypt the message, every time I want to send an email. Granted, I could encrypt by default, but among my typical recipients, the ones that use pgp are in the minority. And yes, I am still using apple mail, despite some interesting new kids on the block (MailMate at the forefront). I do use the add-ons mail tags and mail act on though. – I want to send this email from a particular email account

    These tasks seems to be ideal for automation, I must have captured the macpowerusers bug. Typically I do most of my scripting with python. I dislike solutions that are bound to something specific like a given operating system. Despite recent discussions about the state of the mac, I don’t foresee myself to be using anything else in the near future. Hence, I started looking into automator, which has a few mail related tasks available, such as selecting the account. However, it has no way to automate gpg.

    The next step was to look into applescript. I’ve looked a bit into it in the past, when I created latex based pdfs as notes for omni outliner. Generally, an applescript can be associated with a keyboard shortcut. Keyboard maestro, which I own since a little while, offers similar functionality, with improved user-friendliness. So now, when I am in mail, I just have to type cmd - opt - E, the script is executed, and I get a window as shown below. The three areas highlighted by red rectangles are adapted according to variables in the script.

    Template of an email draft generated with the applescript. Fields marked with a red rectangle are filled by executing the script.

    Feel free to check out my script on github.

    Written by Claus

    January 11th, 2015 at 6:35 pm

    Posted in

    AGU presentation

    without comments

    Next week is AGU week!

    I will be taking part again this year. If you want to see me, my poster presentation is a good opportunity:

    date Wednesday, 17 December 2014
    time 01:40 PM – 06:00 PM noon
    location Moscone West, Poster Hall
    ID: H33E-0866
    title of talk “Incorporating Locally Averaged Distributions Based on Categorical Land-Use Information into Point Estimation”
    session Multiscale Interactions and Structures in Soil-Vegetation-Atmosphere-Systems: Monitoring, Modeling, and Data Assimilation Posters
    authors Claus Haslauer, Theresia Heißerer, András Bárdossy

    You can find my ePoster also online. Feel free to contact me, if you can’t make it on wednesday afternoon. I’ll also be trying to be active on twitter. Looking forward to see you all! 😉

    Written by Claus

    December 12th, 2014 at 6:43 pm

    Posted in